Coffee Education

The SCAE Coffee Diploma is a qualification, with a syllabus of modules, each module earning credits, and when the student achieves 100 credits they are awarded the Diploma.  It sounds fantastic to me.

Here's my problem. It's a bit of a rant really, and it is something I've been ranting about for several months now. Here in the UK it is almost impossible to actually take a course to achieve this qualification. They do exist, in Chelmsford (Essex) and there is a programme run by Marco in Ireland, but they are few and far between.  What bloody good is Chelmsford or Ireland to someone 600miles away from them? I've contacted the SCAE. I've even contacted approved coffee trainers to ask if I can do the course with them on a 1-2-1 basis. The costs are prohibitive, unfortunately. To me this training programme and qualification are a complete and utter notional concept existing almost solely on the SCAE's website.

Compare that with the huge array of training events, webinars, books, seminars etc that the SCAA has available.  It's shocking in comparison, and makes me quite furious that if you want to learn, you have to fight tooth and nail to do so... and pay a lot of money.

I did a three years Masters Degree at Liverpool University and the first time I went there was for my graduation! It is not difficult and not expensive to conduct lectures using the internet these days.

Recently I kind of hijacked a short twitter conversation, which John Gordon, Gwylim Davies and Paul Stack were taking part in. I'm not criticising anyone here, but I was frustrated to be told by John and Gwylim that it is acceptable that any barista wishing to learn should have to claw their way to an education in coffee, because that's how they did it.  They supported the approach that self-education and learning directly from industry leaders such as James Hoffman should be the primary means of barista education. Now it's fair to say that every barista out there has learned something from James, but is that a sustainable way to train batistas? We can't all work for Square Mile.  Reading blogs, scouring www.home-barista.com to read a discussion that took place in 2007, and hoping you get some quick tips whilst chatting to the barista next to you at a competition?  I'm doing all that anyway, but it is harder work than it needs to be.

So, I'd like to get a programme set up, here in Scotland. With the SCAE's help or without it. It could be the Diploma programme (preferably, and hopefully identical to the one run by the SCAE.IE), or it could be another. I don't know. I just think that if there's a demand to learn more about coffee, we should do more than pay lip service to it. We should offer the damn thing to students, and at the moment the SCAE aren't doing that well enough.

I'm probably only getting about 20 readers here anyway, so it's not a very good poll, but I'd be interested in any thoughts. Is there demand for better coffee training?

Apologies if this post offends anyone. That's not my aim. And I'm sure some will disagree with some of my points.  That's fine. I just want to find a way forward.
**Edit** Please see my next post

My UKBC prep and practise area

I haven't really blogged much about my UKBC prep. There was (and is) definitely a little trepidation about doing so, but ultimately I've decided to stick with what seems to work for me... being completely open about what I'm doing, the mistakes, the successes, and recording anything that might help me or others become a better barista.  Hopefully my blogging about it won't influence the views of any judges! I'm confident that they are professional enough not to take prep into account, and will just judge me on my performance on the day.

I have around 3 weeks before I compete at the Glasgow heats of the UK Barista Championships. In an ideal world my routine would have been slick by now. I have certainly done my best to be as prepared as possible... under the circumstances (more on those circumstances later!).  I have sought advice from previous competitors, had a fantastic workshop with Jon Skinner, read the rules many times, discussed some of the finer points with forum members, travelled from Scotland to London to attended an SCAE-UK event focusing on the San Remo and Mahlkoenig equipment, and have been working with a roaster since 15 Oct 2011 on the espresso we will be presenting in the competition. Paul and Eloise Travis from Hands On Coffee have been amazing. Their depth of knowledge is quite astounding for a micro-roastery. It has been a wonderful experience to bounce ideas off each other, and talk to someone who clearly has the same passion and desire to do things well as I do. I'm so honoured that they agreed to let me represent their products, and I'm determined to do my best to do justice to their efforts.

Back In The Day! Late 2010.

I consider myself a working professional barista. I have worked at a handful of places in and around Scotland, and now own my own cafe business, which is currently in its mid-startup stages. If you have ever taken the huge risk of making a complete change of career, selling your home, and moving to a remote part of a different country to set up a new life for yourself and your family, you'll know exactly how important it is that you get it right, and do it professionally.

However, there are logistical issues that go along with the mammoth life change we've undertaken. One of the main challenges, as someone trying to balance setting up a business with building up hands-on machine-time, has been a lack of regular access to a commercial espresso machine... a fairly basic need in this competition!  To overcome this I've supplemented my time on commercial machines with time on a single group domestic Gaggia Classic (1).  It has worked to a degree, but there are severe limitations as a competitor.

Finally though, today I have been able to install my own commercial machine (which has been in storage for months) in my new home. It's a 2 group Faema with an 11 litre boiler and a Thermal Balancing System that allows each group head temperature to be controllable. It will stay here until the cafe opens, which should be just after the UKBC finals. I have paired its arrival with a new set of authentic burrs for my Mazzers - gotta cherish the small things ;)

So having spent 4-5 months refining my knowledge of my competition espresso, and finally having the opportunity to make shots using the commercial equipment, I now find myself having to make some changes to my UKBC script. The espresso is almost the same as it was on the small domestic machine, but even after only a handful of properly dialed in shots it is clear that there are glaring differences too.  Awesome differences!! I loved the espresso on the Gaggia Classic. I am now almost head over heals with the effect of the commercial machine's temperature stability. The complexity has been raised... the taste is more clean, clear... the colour is richer, redder and more consistent throughout the pull, and the crema is thicker, despite already being reassuringly persistent.

I'm happy. But it also makes me wonder what will happen on competition day when the beans are transferred to the San Remo machine. I like the Verona a lot. I would certainly have one in my own business.  Perhaps the espresso will not change when run through the Verona, but there are sure to be difference I think. Different basket shape, for a start, which is something that was highlighted by John Gordon in his workshop.  (It would be great if competitors could use their own baskets. VST has to be the way forward in my view.)  I guess the key thing I need to do is spend a good portion of my practise time on competition day pulling shots with various parameters, to dial in the espresso to how I know it should taste. If that means a different dose weight, brew ratio, extraction time etc, then I just hope I have time to find the sweet spot alongside all the other setup there is to do.



Notes
(1) This is where I expect professional baristas who have never been a home barista to snort derisively.  But the fact is, many of the best baristas I have ever come across hail from the home barista arena. There is a level of passion and obsession that goes with being a home barista which is actually quite rare to find in those who have only ever made coffee as a job.  If you don't believe me, pay a visit to www.coffeegeek.com, www.coffeeforums.co.uk or www.home-barista.com. You'll find contributions from people like David Schomer and James Hoffman, as well as names that might be less well known to some but have made enormous contributions to the world of coffee, like Andy Schecter and Jim Schulman.

Some UKBC Photos (Newcastle)

I had hoped to take more photos of the competitors and perhaps stream some live video, but ended up holding the video camera owned by San Remo, up at the front, so these pics are all I got.

Coffee Water Quality

This is something that has been weighing on my mind lately. It just feels like such a massively under-considered area. So much time and effort go into other coffee parameters, but when it comes to water I've found it really difficult to get much traction in conversations with others (apart from John Gordon, who seems to have dedicated a good portion of time to understanding the issues and also some options for addressing the problems he experiences). I am frequently advised to dismiss my water concerns, for one reason or another. It's not something I need to think too much about, apparently. Whatever the issues I have, I should address them through one or all of the following:

• Adjusting my extraction technique to compensate
• Installing the same filtration and softening systems as everyone else
• Using bottled water (not very practical in a commercial setting, huh?)
• Ignoring it. The SCAA water quality guidelines are outdated, they say,

I can't accept this, I'm afraid. That's not to say that the above are incorrect. Nor that they are correct. My point is, the whole issue is spoken about in such a blasé manner. Opinions are thrown around without a care in the world for whether they are based on any scientific evidence. It is just incredibly incongruous to be so laid back about this brewing parameter, in an industry where people are obsessive about things such as the normal distribution of hole-size in a portafilter basket!

Why the pushback?

But I think I know why people sweep it under the rug. I've attempted a few times in the past to get my head around water quality, and given up. Here's an extract from the first section of Jim Schulman's fantastic article on the subject:

Hardness is the term for the calcium or magnesium carbonate dissolved in water as Ca++, Mg++, and HCO3- (bicarbonate) ions. There are two measures of water hardness, hardness and alkalinity. Hardness measures the amount of positive calcium and magnesium ions; alkalinity the negative bicarbonate ions. Both measures are usually given in calcium carbonate, i.e. scale, equivalent units (abbreviated as CaCO3). This means when one unit of scale precipitates out of the water, hardness and alkalinity measured in CaCO3 units go down by one unit each.

I believe this illustrated that water chemistry is a very dry topic to a non-chemist. Most people in the coffee industry (certainly in the barista arena) are not accustomed to this level of science. Sure, we can proudly consider ourselves geeky and be proponents of coffee brewing as a science, not just an art. But it is rare to find someone who is happy to work as a barista for £8 per hour, and yet is also willing (or even able) to muster the concentration and willpower it takes to get a mental foothold on this topic.

The issues

So backing up a bit, just what are my concerns about water? Well at this stage I don't know what I don't know. I have suspicions, based upon some things I have read on the topic of coffee water quality. I'll continue...

Quality. Purity. What do they mean? In simple terms it seems to mean that there are very few particles (solids) within it other than the H2O itself. Particles might be minerals/metals, such as calcium, iron, potassium, and also things like faecal bacteria (yes... poo!) and substances that affect colour. (Click here for an explanation of ten key parameters in water quality, according to the Drinking Water Quality Regulator) We often hear talk in our industry of ideal water quality measured in parts per million (also known as micrograms per Litre mg/L) ... somewhere around the 150ppm mark is usually touted as good for coffee (although opinions differ). In many parts of the UK, and certainly in the UK's coffee capital of London, water is NOT pure. It is nasty, horrible, recycled piss and the taste of it confirms this. It has a high ppm (something like 300ppm in London). It is also very 'hard' (see below). This has an adverse effect upon coffee taste, as well as damaging coffee brewing equipment such as espresso machine boilers, which quickly develop scale. So to be fair, a good deal of work has gone into providing commercial equipment that can filter out some of this crap and also soften the water, so that problems like scale are reduced.

But where I live, the water is generally very pure, and very soft. Too pure and too soft... maybe. Very soft water has a high pH level – which is a measure of the water's acidity. Soft water does not cause as much scale in coffee equipment, so that's a good thing. But the acidity can apparently cause corrosion of parts, which is just as bad... perhaps worse if it means that corroded metal ends up in your cup of coffee! So does this mean we should increase the mineral content of pure, soft water that we want to make coffee with? I believe the answer is yes, but so far haven't had a great deal of support for this... either from baristas, coffee suppliers, or indeed water treatment specialists... which I suspect is for the reasons already mentioned.

And then there's the impact of that pH level upon the physical extraction of the coffee. Some say that soft water enables more effective diffusion of coffee particles from the grinds, so can result in overextraction if not carefully managed. Some say the opposite(!) - that soft water makes extraction LESS effective.

And even if you get the extraction right, what is the effect of this very pure water upon taste... will the coffee be overly bright and acidic? And therefore will the coffee flavour not match the experience of the roaster when he/she sampled and selected the beans, or when they were profiled and roasted? I don't want to pay good money for beans that could taste of peaches and cream, only to find that the water I'm using makes them taste of lemons and limes. Is this likely? I don't know, and despite some fantastic articles out there, I haven't yet found anyone who can give me an answer that I trust is relevent to my own local water issues, based upon science rather than supposition.

And even once I eventually understand and arrive at my own conclusions, there's the problem of finding appropriate treatment systems at an affordable price. Treatment systems seem to want to 'filter out', rather than 'add back'. For example, this presentation by boiler manufacturer Marco has some excellent points on the subject of water quality, but at the end refers only to filtration.

http://www.marco.ie/other_pdfs/Water%20Presentation%20Advanced.pdf

I know there are water additive solutions out there, but since I haven't found anyone who uses them, this raises all kinds of doubts as to whether they are really needed, whether they are any good, or whether they are readily available.

And this is, I'm sure, only part of the equation.

I've a long way to go on this subject, it seems.
___________________________________________________________
Read the follow-up post on Coffee Water Chemistry written 9 months later.

UK Barista Championships

I'd mentioned to some of the guys on www.coffeeforums.co.uk that I was heading to London for some events related to the UKBC, and was asked if I'd be doing my usual lengthy report afterwards. So I wrote the following piece and Glenn kindly put it up on the website as an article.

The main thrust I wanted to get across was that competitions are not purely for those good enough to win first prize.  Wimbledon wouldn't be much of a competition if the only people taking part were Rafael  Nadal and Roger Federer. It would be a match, not a competition.  All competitions need competitors, of all levels, rising through the rankings as they get better and better.  And entering the competition is in  itself a catalyst for getting better.

Read the article here
(Please forgive the typos!)

Pourover with V60-01

I love the exact moment when I realise I'm wrong. Why? Because it's a snapshot in time ... the precise second when learning has occurred.  I hope I never stop wanting to learn.

I'm an advocate of Scott Rao's books and work. In particular I have previously conducted some experiments in relation to his views on the 'high and dry' phenomenon that seems to be common in baristas' pourover technique.  As a result I've universally avoided ending up with any form of V-shaped cone at the end of my pourovers, aiming instead for the convex dome shape of grinds in the filter cone, that results from spinning the slurry during extraction and drawdown.

I was wrong.

But that isn't to say I don't still firmly support Scott Rao's assertions. I believe I just misinterpreted them.

Ongoing experiments have shown how vastly different the extraction of two different coffees can be, despite using exactly the same parameters and technique.  Obviously grind always needs to be adjusted to the current state of the bean, but grind alone is not the best way to achieve your target pourover results. Pouring technique must also be adjusted.

Sometimes there is no way to achieve a dome of grinds at the end of a pourover without resulting in over-extraction.  The stirring required to ensure that grinds are not left under-extracted at the rim of the V60 can cause too many solids to diffuse from the grinds, overshooting the target TDS.

For a week or so I've been trying to achieve a TDS of around 1.35% for a Tanzanian Kilimanjaro, but every time the reading came in at around 1.6% and the taste was too strong.  In the end I have managed to find a way to hit my target within an acceptably long dwell-time, but it has meant grinding a fair bit coarser and also changing my pour when brewing these beans.  The 'new and improved' pour is probably also better in terms of maintaining brew temperature. It involves a constant slow pour all throughout the brew, rather than many small pours. Infact at times it encroaches on a drip rather than pour.

With such a slow pour the grinds never have a chance to rise up the side of the V60. This means that at any point in time all of the grinds are being extracted evenly, and the 'high and dry' thing never happens. It also therefore means that there is no need to stir. The last 20g of water is just poured slightly quicker to ensure everything is covered, and then the drawdown is allowed to complete... the majority of which takes only perhaps 10 seconds, with residual dripping for a further 10 seconds.

The result is infact a small amount of concave coning of the grinds, but the majority of the slurry remains flat. I deem this acceptable since it has taken place over only the final 10 seconds of the brew, and also the slurry rim (the 'high' grounds) is just 1cm above the flat of the central slurry.

In the cup this works a treat. The TDS and Ext % are right, and also the taste is wonderfully balanced due to the grinds being evenly extracted throughout the filter.

Now I'm not saying this is how I'll be doing it every time. With a Mandheling I have at the moment a good stir with a chopstick at the appropriate time during the brewing process is absolutely the right thing to do, and helps me hit my target extraction.  The point is, there is no single correct technique. It seem that the skill lies in having a repertoire of techniques to enable an appropriate response to the how the beans are extracting.

My learning continues.  I reserve the right to compose another post in a few months, denouncing THIS post as complete bollocks!

Unclean Green Beans

On my trip to Bali coffee plantations last year I bought two small bags of green beans from the producers. I thought they might come in useful for practise roasts, since I'm planning to start home roasting soon.  The beans have been stored in a sealed bag until the other day, when I decided to transfer them to a plastic storage container.

I thought it might be interesting to compare their appearance with some greens that I bought recently from Hands On Coffee, a micro-roaster from Cornwall.  I got a bit of a shock!  I'm so glad I wasn't searched by HM Customs & Excise on my way back into the UK!! This video just goes to show the importance of sourcing your green beans well.

Does anyone know what these little buggers are? Coffee berry borer?